Experience the timeless beauty and exceptional performance of the Stratford II, a non-catalytic wood fireplace that meets the EPA's strictest emissions standards.

Designed for efficiency and style, it features a spacious 2.5 cubic foot firebox, easily accessible through elegant double-cast iron doors. With its impressive heating capacity and distinctive design, the Stratford II is a perfect blend of warmth and sophistication.

Required Accessories: (You will need to choose ONE to complete your unit)
OB-OA10610 - Black Door Overlay
OB-OA10612 - Brushed Nickel Door Overlay

Required Accessories: (You will need to choose ONE to complete your unit)
OB-OA10255 - Traditional Faceplate
OB-OA10256 - Modern Faceplate

Options:
OB-AC01223 - Heat Shield for Surround/Shelf
OB-AC01239 - 4" Diameter x 5' Fresh Air Intake Kit
OB-AC01275 - Firescreen Door
OB-AC01347 - 4" Diameter Fresh Air Intake Register with Airtight Damper
OB-AC01350 - 6" Diameter x 25' Insulated Flex Pipe for Forced Air Kit
OB-AC01359 - 4" Diameter x 25' Insulated Flex Pipe for Fresh Air
OB-AC01374 - Forced Air Kit
OB-AC01375 - Traditional Gravity Kit
OB-AC01389 - Modern Gravity Kit with Adjustable Pipes
OB-AC02091 - 4" Diameter x 10' Insulated Flex Pipe for Fresh Air Intake Kit
OB-AC02760 - Glass Hearth Pad - 10mm - 18" x 50"
OB-AC09200 - Fireplace Carrying Handles

General features

Chimney diameter : 6"
Height x Width x Depth - Overall: 40 5/8" X 36 3/4" X 29 3/4"
Average particulate emissions rate: 1.2 g/h
Maximum log length: 20"
Shipping Weight: 468 lb (212 kg)
Recommended heating area -ft²: 750 - 2,200
EPA loading volume-ft³: 2.61
Optimum heat transfer efficiency: 68%
Combustion technology: Non-catalytic
Maximum burn time: 8h
Blower Included: Yes
Overall firebox volume-ft³: 2.5
High-efficiency certified appliance: Yes, EPA 2020 approved
Log positioning: Loading over width
Flue outlet diameter: 6"
Type of chimney: CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet): 15'
Baffle type: C-Cast or equivalent
Approved for a mobile home installation: No
Warranty: Limited lifetime

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)

United-States

Clearance - top (measured from the platform on which the appliance is installed) 80"
Clearance - combustible side mantle to unit 8"
Clearance - side wall 13"
Clearance - minimum floor protection in front of the appliance 16"
Clearance – from the shelf to the base of the fireplace 58"

Canada

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Door type: Double, glass with cast iron frame
Glass type: Ceramic glass
Glass surface – dimensions (Width X Height): 22 1/4" X 12 1/2"
Glass air-wash system: Yes
Premium quality blower included (CFM): 176
Overall dimension (Height): 40 5/8"
Overall dimension (Width): 36 3/4"
Overall dimension (Depth): 29 3/4"
Door opening – dimension (Height): 10 1/2"
Door opening - dimension (Width): 25 3/8"
Firebox – dimension (Height): 12 1/8"
Firebox – dimension (Width): 20 3/8"
Firebox – dimension (Depth): 12 7/8"
Moulded refractory bricks: Yes
Stainless-steel secondary-air system improving gas combustion: Yes
Cast iron andirons: Yes
USA standard (emissions): EPA
Canadian Standard (emissions): CSA B415.1-10
USA standard (safety): UL 127
Canadian standard (safety): ULC S610
Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)

Appliance performance (1)

Fuel Type: Dry cordwood (16" recommended)
Recommended Heating Area ft² *: 750 - 2,200
Overall Firebox Volume ft³: 2.5
EPA loading volume-ft³ : 1.94
Maximum burn time*: 8h
Maximum Heat Output -dry cordwood (2): 80,000 BTU/h (23.4 kW)
Overall heat output rate < (2) (3): 12,700 BTU/h (3.72 kW) to 60,700 BTU/h (17.79 kW)
Average overall efficiency (dry cordwood) (3) : 64 % (HHV) (4) 68% (LHV) (5)
Optimum overall efficiency (6) (7) : 70%
Optimum heat transfer efficiency (8): 68%
Average particulate emissions rate (9) : 1.2 g/h
Average CO (10) : 98 g/h

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(*) Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

(9) This appliance is officially tested and certified by an independent agency.

(10) Carbon monoxide.